Testing for Electromagnetic Pollution
In Russia and surrounding countries they have done extensive testing to determine safe levels of electromagnetic energy.
“The Health Department of the Republic of Kazakhstan has stated that any reading on this meter exceeding 50 is unacceptable and steps must be taken to lower such readings.”
Vitually all homes in the USA have unsafe levels of electromagnetic energy.
If you are concerned about the levels of EMF’s in your home, testing is fairly easy. A simple meter can be used to measure the levels in your home.
With testing, you are able to determine how many filters you will need on a per room basis. You can even determine if certain lamps, electronics, or devices are emitting higher EMF’s than others.
The STETZERiZER® Microsurge Meter
Microsurge meters measure the levels of safe, borderline, or dangerous levels of “energy” present. These levels are conveniently shown on the back of the meter for reference. These levels have been developed through research (much of it in Russia and neighboring countries) and confirmed by experience in North America. The levels have been adopted by the Sanitary Stations (Health Departments) of the Republic of Kazakhstan.
Starting from points that typically have the highest readings such as the power input panel, computers, and televisions, the meter is used to measure the initial levels of GS energy, and its reduction as filters are added. Once the GS levels are acceptable at one location, the process should be repeated at the next location. After the installation of the filters is complete, a final confirmation of the GS levels should be performed throughout the house.
Buy our STETZERiZER® Microsurge Meter or the STETZERiZER® Package Filter and Microsurge Meter.